Installation Troubleshooting VxRail

Installation Troubleshooting

Power on all VxRail nodes one by one.
Type 192.168.10.200 into the browser and start the setup steps.
If there is no access, check the network settings.
If you are sure of the correct network settings, Connect using the user name “root” and password “Passw0rd!” to ESXi Web , you can restart VxRail Manager via ESXi Shell unless you want to give static IP to ESXi.
Make sure that you can ping the default GW by connecting to VxRail Manager via SSH (mystic user) or ESXi Web GUI.
If VxRail Manager is running but the nodes are not visible then simply run /etc/init.d/loudmouth restart command through ESXi Shell and try again. If it still does not appear onthe Multicast-IGMP settings may not be correct switch side, check it again.
Sometimes, a node with a different firmware or software level can coincide. In such cases doing RASR Factory Reset can solve the problem.

Related posts

The SnapAPI kernel module is not loaded for the kernel

Setup 2-node vSAN Cluster

How to fix Out of Date VxRail vSAN 6.7 U3 status on VM Storage Policy